SLA/DLP 3D Printing Plastic Material
General Purpose Resin
Powered By
Colours Available
Stone Coal Black, Deep Blue
Mechanical Properties
Tensile Strength (D638) – 73MPa
Tensile Modulus (D638) – 2600MPa
Impact Strength (D256A) – 22J/m
Flexural Strength (D790) – 82MPa
Flexural Modulus (D790) – 1900MPa
Thermal Properties
Heat Deflection Temperature (ISO 75) – 70°C
Samples cured for 30 minutes @ 60°C
Based on TDS provided by Manufacturer.
Technical Data Sheet available upon request.
-
Plastic Material: Polyetherketoneketone – PEKK
Polyetherketoneketone (PEKK) is an exceptional semi-crystalline high-performance thermoplastic. Coming from the polyaryletherketone (PAEK) family of polymers, it is recognised for its high-temperature stability and outstanding mechanical strength. Various industries widely regard PEKK as a top-performing material. Some manufacturers have incorporated carbon fibers into PEKK to further enhance the rigidity and mechanical properties of the material, […]
-
Plastic Material: ABS vs ASA – What’s the difference?
A frequently asked question in the 3D printing industry is: what is the difference between ABS and ASA? Today, we are going to break down the differences and clear up the air between these two materials. Let’s start with the technical data. Material Filament PM ABS 3DXTech ASA Density (g/cm3) 1.04 1.07 Tensile Strength (MPa) […]
-
Plastic Material: Nylon Carbon Fibre – PA CF
Nylon Carbon Fibre, or PA CF for short, is sometimes also known as black aluminium. It is a composite material made from Nylon and Carbon fibre, giving the nylon stiffness and mechanical strength. Key Features Properties Applications Get your material or parts 3D Printed today! Need help? Contact us and we will get back to […]
