Black
Tensile Strength (D638) – 140MPa
Tensile Modulus (D638) – 11000MPa
Impact Strength (D256) – 89J/m
Melting Temperature, Tg (D3418) – 343°C
Based on TDS provided by Solvay.
Technical Data Sheet available upon request.
Different grades are available.
MOQ Required for 3DXTech Products.
Polyetherketoneketone (PEKK) is an exceptional semi-crystalline high-performance thermoplastic. Coming from the polyaryletherketone (PAEK) family of polymers, it is recognised for its high-temperature stability and outstanding mechanical strength. Various industries widely regard PEKK as a top-performing material. Some manufacturers have incorporated carbon fibers into PEKK to further enhance the rigidity and mechanical properties of the material, […]
A frequently asked question in the 3D printing industry is: what is the difference between ABS and ASA? Today, we are going to break down the differences and clear up the air between these two materials. Let’s start with the technical data. Material Filament PM ABS 3DXTech ASA Density (g/cm3) 1.04 1.07 Tensile Strength (MPa) […]
Nylon Carbon Fibre, or PA CF for short, is sometimes also known as black aluminium. It is a composite material made from Nylon and Carbon fibre, giving the nylon stiffness and mechanical strength. Key Features Properties Applications Get your material or parts 3D Printed today! Need help? Contact us and we will get back to […]
